Ventiladores centrífugos de media presión / a transmisión CENTRIFUGAL MEDIUM PRESSURE FANS / BELT DRIVEN 345 CV092024 MTRM Different configurations of free shaft without motor or belt driven motor Eje libre sin motor o motor a transmisión en diferentes configuraciones 60 +info Hz ErP MANUFACTURING FEATURES • Fanmade of Fe360 sheet.The fanpaint finish is based on a Qualicoat polyester powder coating stoved at 200ºC, with an average film thickness of 70 microns. Average heat resistence of coating is 180ºCwithpeaks of 200ºC. • Fully welded housing. • Single inlet backward impellerwith self-cleaning system, manufactured of rolled steel sheet and polyester powder finishing.Impellers are paintedwithpolyester primer that resists temperatures up yo 300ºC. • Motorized fan with base frame (configuration 12). Full equipped fans including: motor, pulleys, belts, belts guard and shaft guard. Fitted over a base plate. IE4motors for 75kWpower or higher. • It allows adjusting the orientation locally frommodels 220 to 630. Models sizes from 710 to 2000 size the orientation is fixed. • Available positions (to be indicated in case of order): LG270, LG0, LG45, LG90, LG135, LG180, LG225, LG315, RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315. • The indicated codes correspond to the model in position LG270. APPLICATIONS Designed for inline installation, they are suitable for: • Industrial applications, extraction or injection of air. • Cooling of machines and parts. • Clean air and pneumatic transport. • Exhaust after filters, separators and cyclones. • Dusty air or with low load of granulatedmaterials. • Maximum working temperature: carried air: 200ºC, ambient: 60ºC. UNDER REQUEST • Fans for 60Hz and special voltages. • 2 speedmotor. • Fan with free shaft (configuration 1) or with motor supported on the pedestal side (configuration 9). • C4 coating painting • Hot dip galvanized • Special steel (Cor-Ten A, Hardox...) • Inox 304 (normal or electropolished finish) • Inox 316 (normal or electropolished finish) • Cooling wheel • Anticaloric paint • Reinforced housing • Fully welded housing (waterproof ) • Insulated housing • Split casing (for big sizes) • Inspectiondoor tofacilitatemaintenanceandcleaning • Drain plug. • Airtight axle • Frontal foot • Double suction flange • Available in non-sparking air passage and standard motor. • Other brands of motors. This is a belt driven range, each model can be manufactured at different RPM, in case of order should be indicated the desired RPM for the correct operation of the unit and according to the needs. CARACTERÍSTICAS CONSTRUCTIVAS • Ventilador fabricado en chapa Fe360. La pintura de los ventiladores está formulada a base de poliéster enpolvo Qualicoat polimerizada a 200ºC con un grosor medio de 70 micras. La resisténcia térmica media de la pintura es de 180ºC con picos de 200ºC. • Carcasa totalmente soldada. • Ventilador centrífugo con sistema autolimpiante y rodetede álabes hacia atrás (a reacción) de simple aspiración y alto rendimiento, fabricada en Fe360 equilibrada estática y dinámicamente. Las turbinas se pintan con imprimación de poliéster con una resistencia térmica de 300ºC. • Ventilador con motor montado sobre bancada (sistema 12). Equipo completo que incluye: motor, correas, poleas, protector de transmisión y eje. Motores IE4 para potencias de 75kWomas. • Permite variar la orientación endestino, en losmodelos del 220 al 630. En los tamaños que van del 710 al 2000, la orientación es fija. • Posiciones disponibles (a indicar en caso de pedido): LG270, LG0, LG45, LG90, LG135, LG180, LG225, LG315, RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315. • Los códigos indicados corresponden al modelo en posición LG270. APLICACIONES Diseñadospara instalaciónenconducto, son indicadospara: • Procesos industriales, extraccióno inyección localizada. • Refrigeración de máquinas, enfriamiento de piezas. • Transporte de aire limpio o ligeramente polvoriento. • Transporte de aire polvoriento o con ligera carga de materiales granulados exceptuandomateriales filamentosos. • Aspiración después de filtros, separadores y ciclones. • Transporte neumático. • Temperatura máxima de trabajo en continuo: aire transportado: 200ºC, ambiente: 60ºC. BAJO DEMANDA • Ventiladores para 60Hz voltajes especiales. • Motor 2 velocidades. • Ventilador a eje libre (sistema 1) o con motor en mochila (sistema 9). • Acabado pintura C4 • Galvanizado en caliente • Aceros especiales (Corten, Hardox...) • Inox 304 (acabado normal o electropulido) • Inox 316 (acabado normal o electropulido) • Rodete de refrigeración • Pintura anticalórica • Carcasa reforzada • Carcasa totalmente soldada (estanca) • Carcasa aislada • Carcasa partida (para tamaños grandes) • Puerta inspección para facilitar el mantenimiento y la limpieza. • Drenaje • Eje estanco • Pie frontal • Doble anillo aspiración • Disponibles conpasodeaireantichispas ymotor estándar. • Otras marcas de motores. Esta gama es a transmisión, cadamodelo se puede fabricar adistintas RPM, en casode pedido se debe indicar las RPMa las que desea el equipo para que el modelo quede correctamentedefinido y seaadecuadoa sus necesidades.
RkJQdWJsaXNoZXIy MTE4OTIxMQ==