50 Hz
ALLGEMEINE MERKMALE: Baureihe bestehend aus 16 verschiedenen Größen, von 250 bis 1402, ausgestattet mit 2-, 4- und 6-poligen Dreiphasenmotoren. Luftfördermengen von 1.330 m³/h bis 85.000 m³/h. Maximale Arbeitstemperatur von 130 °C im Dauerbetrieb. Statische Drücke bis zu 650 m Wassersäule. BAULICHE MERKMALE: Gehäuse hergestellt aus Walzstahlblech.Komplett geschweißtes Gehäuse. Mehrschaufel-Hochleistungsturbine mit nach hinten (Reaktionsturbine) geneigten Schaufelrädern mit einfacher Ansaugung, Ausführung in Walzstahlblech und durch eine Pulverbeschichtung aus Epoxidharz vor Korrosion geschützt. Dank Pulverbeschichtung mit Epoxidharz vor Korrosion geschützt.Standardisierter Asynchron-Käfigläufermotor mit Schutzart IP-55 und Isolierklasse F. Standardspannungen von 230 V, 50 Hz, für Einphasenmotoren, 230/400V 50Hz, für Dreiphasenmotoren bis 5,5 PS und 400/690 V, 50 Hz, für höhere Leistungsbereiche. ANWENDUNGEN: Grundlegende Anwendungsbereiche dieser für den Rohreinbau gedachten Lüfter sind: Abkühlung, Maschinen, Motoren, Bauteile. Rauchansaugung. Industrielle Verfahren, bei denen die Luft stark mit Staub oder sogar mit Feststoffgranulat belastet ist, AUSSER TEXTILFASERN. AUF ANFRAGE: Lüfter, die mit 60 Hz, besonderen Spannungen usw. arbeiten. Motor mit 2 Geschwindigkeitsstufen. Explosionsgeschützte oder flammensichere Lüfter mit Motor mit ATEX-Zertifikat. Ventilator ausgelegt für 250 °C. Ventilatoren hergestellt aus feuerverzinktem Blech oder rostfreiem Edelstahl.
| A | a | a1 | a2 | b | B | b1 | b2 | C | d | D | d1 | D1 | d2 | D2 | D3 | D4 | D5 | D6 | D7 | E | F | G | H | H1 | H2 | I | J | K | L | M | N | N1xØ1 | n1xp | N2xØ2 | n2xp | O | O6 | Ø3 | Ø3 | P | R | S | S1 | S2 | S3 | S4 | S5 | S6 | S7 | T | U | W | X | X1 | X2 | X3 | X4 | X5 | X6 | X7 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 430 | 1130 | 1210 | 1270 | 801 | 1751 | 881 | 941 | 2325 | 1130 | 1000 | 1200 | 1635 | 1250 | 1395 | 1325 | 1272 | 1145 | 990 | 1863 | 2845 | 1000 | 401 | 1320 | 1000 | 1700 | 535 | 1450 | 1560 | 1690 | 690 | 802 | Nº24 M10x30 | 3x200 | 20x18 | 5x200 | 130 | 863 | 24 | 24 | 1450 | 55 | 1325 | 1145 | 990 | 1000 | 1863 | 1635 | 1395 | 1272 | 85 | 1621 | 946 | 1145 | 1000 | 1863 | 1635 | 1395 | 1325 | 1272 | 990 |
Flexibler Verbindungsflansch zur Vermeidung von Schwingungen an der Anlage.
MANUFACTURING FEATURES
• Flexible joint to clinch the fan to the duct.
• Avoids transmission of vibrations for circular and rectangular connection.
• Dimensions: two metallic flanges of 45mm each one and a flexible flange of 60mm.
• The reel is 30,5m lenght.
• Maximum pressure: 20 mmca.
• Fire resistance M0 from -50ºC to +200ºC in continuous and 400ºC/2h.
MANUFACTURING FEATURES
• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.
*Dial panel incorporated. Optional EMC filter.
Certifications: CE/UL/CSA/EN/GOST/CCC.
Protection index IP20.
The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.
SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III
EMC filter incorporated for models from 47A (included)
*Lineal load rated current
**Quadratic load rated current
MANUFACTURING FEATURES
• Support of great radial and axial elasticity.
• These low-profile, compact and elastic supports control the three directions of movement with large deformations in the rubber.
• It consists of two parallel armour adhered to the bell-shaped rubber and by a base with handles.
• These supports with handles have a threaded hole in their upper frame and are easy to install and fix.
• The steel protection washer allows it to withstand overloads by increasing its rigidity and protects the rubber from dripping hydrocarbons.
• Elastomer type NR or high quality elastomer. Working temperatures between -40ºC and + 70º C.
• Taking into account the tolerances of hardness in the elastomers, the mechanical characteristics of these series may differ.
• Range of 6 sizes and 3 different hardnesses (45-60-75) to fit a load range between 2 Kg and 1300 Kg.
1. Soft: hardness A 45
2. Average: hardness B 60
3. Hard: hardness C 75
APPLICATIONS
• Very appropriate in the elastic suspensions of machines that present vibrations of horizontal components.
MANUFACTURING FEATURES
• Metal insulators designed to work with compression with 85% insulation according to the following arrows (travel in mm) and rpm:
Arrow (mm.) r.p.m.
20 mm >600 r.p.m.
30 mm >500 r.p.m.
• Made of high quality elastic steel, with rectangular base and rubber mat to improve the grip. It treats of a resistant product and easy assembly, that avoids all type of vibrations of the fans to the structure of the premises.
• Operating temperature from -45 ° C to + 120 ° C.
APPLICATION
• To install under machines with rotating components, ventilation groups, fans, ventilation boxes, etc.
Structure made of extruded aluminum profiles available in different dimensions according to the panel to be installed and the fan volume. The profiles joining is made of polyamide corners, which gives them great strength and the possibility of disassembling the structure into pieces.
Panels can be made of a single sheet with inner insulation of 10 mm thick polyethylene foam, or 2 sheets (sandwich panel) with thicknesses of 25 mm or 50 mm, depending on the required attenuation degree.
The sheets of each panel can be galvanized steel, galvanized steel with coloured plastic coating or stainless steel.
The lower part is finished off with a structure / plinth for transport and handling, made of galvanized sheet or upn-80/100 joist, depending on the cabin dimensions and weight.
The air inlets and outlets of the cabin have anti-vibration tarpaulins coupled to mounted fans. These fans rest on a floating base with acoustic dampers.
RRP to consult.
MANUFACTURING FEATURES
• Circular-circular coupling flange through anti-vibration canvas.
• Supplied with two O-shaped plates made of galvanized sheet metal and necessary screws.
MANUFACTURING FEATURES
• Rectangular-rectangular coupling flange through anti-vibration canvas.
• Supplied with four L-shaped plates made of galvanized sheet metal and necessary screws.
| Nº | Code | Familie | Name | Qty |
|---|---|---|---|---|
| 2 | T01914084 | IMPELLER | MBRU 1403 T6 45kW LG | x1 |
| 3 | 503314000SP04 | INLET CONE | MBRU-MTRU 1400 | x1 |
| 4 | 721001298 | MOTOR | 45KW T6 B3 400/690V | x1 |
+34 972 720 150