fan image
Model
HH 35 T2 0,55kW

HH 35 T2 0,55kW

EXTERNAL MOTOR, VARIABLE PITCH BLADES

MANUFACTURING FEATURES:

• Long cased fan.
• Transmission ball bearings set inside a sealed box manufactured in steel or cast aluminium. Ball bearings permanently greased.
• Cast aluminium impeller with variable pitch angle in origin.
• Polyester powder finishing coat.
• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz in single phase motors and 230/400V 50Hz in three phase motors, up to 4kW and 400/690V 50Hz for higher powers.
• Inspection door located on the lower part of the housing.

APPLICATIONS:
Designed for inline installation, they are suitable for:
• Air renewal in buildings and industries.
• Extraction of hot air up to 110ºC.
• Maximum working temperature: carried air: 110ºC, ambient 60ºC.

UNDER REQUEST:
• Supply impeller (air direction from impeller to motor),
• Reversible impeller.
• Polyamide impeller.
• 60Hz fans and special voltages.
• 2 speed motors.
• Hot-dipped galvanised or stainless steel housing.

Fan

Flow
4100 m3/h

HH 35 T2 0,55kW

Dimensions scheme
A B C D E F J màx K màx
360 420 390 10 395 8x45º 540 254

HH 35 T2 0,55kW

Electrical scheme

HH 35 T2 0,55kW

Model
INT 25 3P A
Code
INT253PA
Information
SAFETY SWITCH

Safety start-stop switch according to IEC 60947-1 and IEC 60947-3.

The INT is IP65 and always equipped with an auxiliary contact.

Useful for cutting the current before handling the fan.

 

Model
RP 35
Code
960300100
Information
INLET-OUTLET PROTECTION GUARD

Protection guard at the side of impeller and motor in long casing models. Protection guard only in impeller side in short casing models.
Specially designed to avoid entrance of objects and in contact with impeller.
Manufactured of welded metal wire.
According to ROHS 2002/95/EC (restriction of use in certain hazardous substances on electrical and electronic equipments)

Model
PCP 35
Code
963230105
Information
PLASTIC GRAVITY SHUTTER

Gravity shutter.
The shutter will open by air force and will close when the fan is stopped.
Made of ABS plastic.
UV rays protected.
Note: Maximum air speed 16 m/s

Model
PO 35
Code
960001653
Information
OPTIONAL MOUNTING SUPPORT

Manufactured in steel and protected against corrosion with polyester resin powder

Model
AC 350
Code
960003211
Information
CONECTIONFLANGE

Connexion flange to be fitted in the long casd axial fans inlet and outlet. For centrifugal models only extraction and for Axial models extraction and impulsion.
 

Model
BA-400 35
Code
960002053
Information
ANTI-VIBRATING FLANGE 400º/2H

Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations in the installation.
Approved according to European standard EN 12101-3 400ºC / 2h. Classification to fire: M0.
Supplied with 2 fixing clamps.
Width: 160 mm.

Model
SIL-C 355/355
Code
960355355
Information
INLET-OUTLET CIRCULAR SILENCER

Designed to reduce fan noise and be assembled to circular fans and ducts. Optional connection flanges might be needed to connect directly to fans.
• Casing in galvanised steel, thickness 0,8mm up to Ø1250mm and 1,0mm over.
• Mounting flange with threaded insert.
• Acoustic material in mineral wool 70Kg/m3 with protection against erosion by glass fibre fire resistance M0 and extended metal sheet.
• Acoustic data tested in accordance to ISO 7235.
• Holes according to the Eurovent Standard.
• The SIL-CN are provided with an inner core that increases the attenuation of the silencer.
• Can support pressures up to 1000Pa

Model
SIL-C 355/532
Code
960355532
Information
INLET-OUTLET CIRCULAR SILENCER

Designed to reduce fan noise and be assembled to circular fans and ducts. Optional connection flanges might be needed to connect directly to fans.
• Casing in galvanised steel, thickness 0,8mm up to Ø1250mm and 1,0mm over.
• Mounting flange with threaded insert.
• Acoustic material in mineral wool 70Kg/m3 with protection against erosion by glass fibre fire resistance M0 and extended metal sheet.
• Acoustic data tested in accordance to ISO 7235.
• Holes according to the Eurovent Standard.
• The SIL-CN are provided with an inner core that increases the attenuation of the silencer.
• Can support pressures up to 1000Pa

Model
SIL-C 355/710
Code
960355071
Information
INLET-OUTLET CIRCULAR SILENCER

Designed to reduce fan noise and be assembled to circular fans and ducts. Optional connection flanges might be needed to connect directly to fans.
• Casing in galvanised steel, thickness 0,8mm up to Ø1250mm and 1,0mm over.
• Mounting flange with threaded insert.
• Acoustic material in mineral wool 70Kg/m3 with protection against erosion by glass fibre fire resistance M0 and extended metal sheet.
• Acoustic data tested in accordance to ISO 7235.
• Holes according to the Eurovent Standard.
• The SIL-CN are provided with an inner core that increases the attenuation of the silencer.
• Can support pressures up to 1000Pa

Model
SIL-CN 355/355
Code
961355355
Information
INLET-OUTLET CIRCULAR SILENCER

Designed to reduce fan noise and be assembled to circular fans and ducts. Optional connection flanges might be needed to connect directly to fans.
• Casing in galvanised steel, thickness 0,8mm up to Ø1250mm and 1,0mm over.
• Mounting flange with threaded insert.
• Acoustic material in mineral wool 70Kg/m3 with protection against erosion by glass fibre fire resistance M0 and extended metal sheet.
• Acoustic data tested in accordance to ISO 7235.
• Holes according to the Eurovent Standard.
• The SIL-CN are provided with an inner core that increases the attenuation of the silencer.
• Can support pressures up to 1000Pa

Model
SIL-CN 355/532
Code
961355532
Information
INLET-OUTLET CIRCULAR SILENCER

Designed to reduce fan noise and be assembled to circular fans and ducts. Optional connection flanges might be needed to connect directly to fans.
• Casing in galvanised steel, thickness 0,8mm up to Ø1250mm and 1,0mm over.
• Mounting flange with threaded insert.
• Acoustic material in mineral wool 70Kg/m3 with protection against erosion by glass fibre fire resistance M0 and extended metal sheet.
• Acoustic data tested in accordance to ISO 7235.
• Holes according to the Eurovent Standard.
• The SIL-CN are provided with an inner core that increases the attenuation of the silencer.
• Can support pressures up to 1000Pa

Model
SIL-CN 355/710
Code
961355071
Information
INLET-OUTLET CIRCULAR SILENCER

Designed to reduce fan noise and be assembled to circular fans and ducts. Optional connection flanges might be needed to connect directly to fans.
• Casing in galvanised steel, thickness 0,8mm up to Ø1250mm and 1,0mm over.
• Mounting flange with threaded insert.
• Acoustic material in mineral wool 70Kg/m3 with protection against erosion by glass fibre fire resistance M0 and extended metal sheet.
• Acoustic data tested in accordance to ISO 7235.
• Holes according to the Eurovent Standard.
• The SIL-CN are provided with an inner core that increases the attenuation of the silencer.
• Can support pressures up to 1000Pa

Model
PC2 40
Code
PC24040
Information
ALUMINIUM GRAVITY SHUTTER

• Overpressure backward damper for facade made of extruded aluminum and standard natural aluminum fin-ishing.
• It incorporates weatherstrip in the fins to achieve greater efficiency in the closure and noise damping.
• Maintains overpressure or depression inside a room with respect to the outside or other adjacent rooms.
• Drills incorporated in frame for wall or duct fixing with screws or rivets.
• Recommended maximum air passage speed 6m/s. maximum temperature of 80ºC.

Model
SFC 230 I 2,5A *
Code
SFC230I003
Information
FREQUENCY SPEED CONTROLLER

Designed for controlling fan motors speed in HACV applications. Ultra compact installation, simple cabling, easy parameterization and wide standard functions. Integrated control unit panel with digital dial. PID card. Optional FILTRO EMC. Certifications: CE/UL/CSA/EN/GOST/CCC. Protection Marking: IP20.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

Model
SFC 400 III 2,2A *
Code
SFC400III2
Information
FREQUENCY SPEED CONTROLLER

Designed for controlling fan motors speed in HACV applications. Ultra compact installation, simple cabling, easy parameterization and wide standard functions. Integrated control unit panel with digital dial. PID card. Optional FILTRO EMC. Certifications: CE/UL/CSA/EN/GOST/CCC. Protection Marking: IP20.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

HH 35 T2 0,55kW

Spare parts scheme
Code Family Name Qty RPM Angle
1 H35006235ASTD ALUMINIUM IMPELLER 350:AA0:6 G35 D14 x1 - -
2 721001031 MOTOR 0,55kW T2 B3 230/400V x1 - -
3 732007101 PULLEY SPZ71-1 ( 1108 ) x2 - -
4 733110814 TAPER 1108D14 x1 - -
4 733110824 TAPER 1108D24 x1 - -
5 264349415 PIECE TRANSMISSION HH 35-45 x1 - -
6 731041031 BELT ZX 30.5 x1 - -