ОСОБЕННОСТИ ПРОИЗВОДСТВА:
• Короткий корпус осевого вентилятора с усиленной круглой рамой.
• Модульная сборка мотор-крыльчатка. Рабочее колесо из литого алюминия с регулируемым углом наклона. Финишное порошковое полиэфирное покрытие.
• Стандартный асинхронный двигатель с короткозамкнутым ротором с защитой IP-55 и изоляцией класса H, сертифицированной для 300ºC / 2 ч и ATEX (II3G). Изготовлены со стандартными напряжениями: 400V(Y) В, 50 Гц для трехфазных двигателей до 3 кВт и 400 В, 50 Гц для более мощных и двухскоростных двигателей. Двигатель с энергоэффективностью IE3 от 0,75 кВт до 45 кВт на одной скорости.
• Защитное кольцо из алюминия.
ПРИМЕНЕНИЕ:
Разработанные для установки в линию, они подходят для:
• Аварийный дымоудаление с двигателем во взрывоопасной зоне.
• Максимальная рабочая температура: 60ºC.
ПО ЗАПРОСУ:
• Подача от крыльчатки (направление воздуха от крыльчатки к двигателю).
• 100% реверсивное рабочее колесо.
A | B | C' (Mot. T.100) | C' (Mot. T.100L) | C' (Mot. T.112) | C' (Mot. T.132M) | C' (Mot. T.132S) | C' (Mot. T.71) | C' (Mot. T.80) | C' (Mot. T.90L) | C' (Mot. T.90S) | D | E | F | J | O |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
725 | 690 | 473 | 515 | 496 | 565 | 527 | 377 | 409 | 433 | 409 | 633 | 250 | 454 | 12 | 12x30º |
CONSTRUCTION FEATURES
• Protective grille on the motor and propeller side to prevent objects from entering. For HC and HCA models, the RP grille is only applicable on the propeller side. The RP is also suitable for the HMR EVO range, both for intake and discharge (note that the grille is of different sizes depending on whether it is for intake or discharge)
• Constructed with electro-welded rod.
• Compliant with ROHS directive 2002/95/EC.
ON REQUEST
• Grille in 304 or 316 stainless steel with electropolished finish.
ФЛАНЕЦ ПРОТИВО ВИБРАЦИОННЫЙ
Гибкое соединение для приклепывания вентилятора и воздуховода. Это позволяет избежать передачи вибрации. Размеры: металлические фланцы: 45 мм, гибкий фланец: 60 мм.
Set that allows to install short or long case fans on the roof protecting them from inclement weather. Kit suitable for fire (metal cap).
MANUFACTURING FEATURES
Set consisting of:
•Cowl made of galvanized sheet.
• Support framework for roof adaptation in laminated steel sheet protected against corrosion by powder coating polyester resin.
• Anti-bird protection grid protected against corrosion.
APPLICATIONS
Designed for roof installation, they are indicated for:
• Renovation of air in all types of buildings and industries.
• Smoke extraction.
• Contribution of clean air.
• Maximum temperature subject to installed fan.
UNDER REQUEST
• Framework support in AISI 304,316.
• Cold galvanized steel.
• Hot galvanized steel.
MANUFACTURING FEATURES
• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.
*Dial panel incorporated. Optional EMC filter.
Certifications: CE/UL/CSA/EN/GOST/CCC.
Protection index IP20.
The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.
SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III
EMC filter incorporated for models from 47A (included)
*Lineal load rated current
**Quadratic load rated current
MANUFACTURING FEATURES
• Metal insulators designed to work with compression with 85% insulation according to the following arrows (travel in mm) and rpm:
Arrow (mm.) r.p.m.
20 mm >600 r.p.m.
30 mm >500 r.p.m.
• Made of high quality elastic steel, with rectangular base and rubber mat to improve the grip. It treats of a resistant product and easy assembly, that avoids all type of vibrations of the fans to the structure of the premises.
• Operating temperature from -45 ° C to + 120 ° C.
APPLICATION
• To install under machines with rotating components, ventilation groups, fans, ventilation boxes, etc.
Switch for ATEX environments. Suitable for zones 1-2 (gas) and 21-22 (dust), index protection IP65. Manufactured in aluminum alloy and RAL 7000 gray finishing coat. External screws in stainless steel. Control on the front. Tensions up to 690V. According to directive 2014/34 / UE (ATEX).