HIGH EFFICIENCY COUNTER FLOW HEAT EXCHANGER WITH EC MOTOR
MANUFACTURING FEATURES
High efficiency heat recovery unit (Eff.92%) with elec- tronic regulation, EC motor and modbus connec- tion for an optimized and centralized management. Counter flow heat exchanger, Eurovent certified. Set in insulated steel boxes with sandwich self-extin- guishing polystyrene foam panels. With total bypass and CTRL-MAX control (see options in control panel in documentation), with COP, CAV, VAC and modbus. Configuration options: without heating, with electric or water battery (cold or hot). With ePM1≥50% (F7)/ISO ePM1 70% (F7) or ePM1≥50% (F7)+ePM1≥80% (F9)/ePM1≥50% (F7) filters. Versions for vertical and horizontal installation.
CHASSIS:
• Modular structure, in 30mm extruded aluminum profile and reinforced with nylon corners.
• Made up of sandwich panels insulated with self- extinguishing polystyrenes, thickness 25 mm and density 30 kg/m3.
HEAT EXCHANGER:
• Aluminium Counter flow heat exchanger with 92% efficiency.
• Eurovent certified.
FANS:
• PLUG FAN Probat EEC by Casals, ErP compliant.
FILTERS:
• ePM1≥50% (F7)/ePM1≥50% (F7) or ePM1≥50% (F7)+ePM1≥80% (F9)/ePM1≥50% (F7).
COILS:
• In the horizontal configuration, the heating module is incorporated in the unit, while in the vertical ver- sion this module is external to the unit.
CONTROL:
• CTRL-MAX: Automatic bypass, manual or au- tomatic speed control by choosing constant flow (CAV), variable flow rate (VAV) and constant pressure (COP). Automatic management of the post-heating temperature of the electric coil or cold or hot water coil. Modbus connection.
CAV- CONSTANT FLOW
COP- CONSTANT PRESSURE
VAV - VARIABLE FLOW (CO2 sensor)
APPLICATIONS
• Shopping centers, small shops, banks, hospitality, schools, office buildings, public buildings.
UNDER REQUEST
• Without control.
• Manual bypass.
• Kit COP+CAV, VAV.
• ePM1≥80% (F9)/ePM1≥50% (F7) filters.
• Cold water coil.
• Remote display and/or Modbusprotocol
CONFIGURATIONS
Vertical and horizontal configurations with and with- out coils. Consult other special configurations.
DOMEX EEC vertically only available with electrical coil; it is not possible to install a water coil. Both coils can only be installed in CV and EV configurations.
A | B | C | D | E | F | G | H | I (BA) | I (BE) | K | M | N | Ø (BA) |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1600 | 650 | 2200 | 450 | 700 | 590 | 230 | 600 | 400 | 500 | 650 | 800 | 350 | 1/2 |
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
Duct sensor for measuring temperature, relative humidity and CO2 in the rooms.
Optional: The CO2 modules can be removed from the sensor to be calibrated.