Product out of catalogue
fan image
Model
LARUS 125 TURBO
Code
507501200Z110

LARUS 125 TURBO

AXIAL FAN FOR EXHAUST VENTILATION WITH BACKDRAFT DAMPER

MANUFACTURING FEATURES

• Casing and impeller made of high quality durable ABS plastic, UV resistant.
• The fan is equipped with a backdraft damper for back flow preventing.
• Ultra thin front panel (8mm).
• Protection rating IP 34.
• Single phase motor 230V 50/60Hz for models 100 and 125. Model 150 is 230V 50Hz


APPLICATIONS

• Continuos or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
• Ventilation shaft mounting or duct connection.
• Compatible with 100, 125 and 150mm air ducts.

UNDER REQUEST

• Timer.

Fan

Max flow
240 m³/h
Weight
0.82 Kg

Motor

Power
0,024 kW
RPM Motor
2400
I max. 230 V
0,105
LARUS 125 TURBO
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

LARUS 125 TURBO

Dimensions scheme
B H L L1 ØD
180 150 94 25 125

LARUS 125 TURBO

Electrical scheme

LARUS 125 TURBO

Model
INT 25 3P A
Code
INT253PA
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
REGD-1
Code
300782600
Information
MANUAL SINGLE PHASE SPEED CONTROLLER

Speed controller for single phase voltage (230 Vac - 50 Hz) controlable motors by varying the supplied voltage through phase angle control.
External enclosure in white-ivory plastic.
Internal enclosure in polyamide.
Maximum environment temperature: 35ºC.

Model
REG FILTER
Code
REGFILT
Information
CONSTANT PRESSURE FAN CONTROL

PUSH BUTTONS
The regulator has 4 buttons: ON / OFF, MODE, UP and DOWN.
Note: If the backlight is off, the first press turns on the backlight. With the backlight on, the push button functions are as described below.


Basic functions:
• ON OFF:
Short / long press: Select the on / off state of the regulator.
• MODE:
Short press: Selects the auto / manual regulation mode.
Long press: Access parameter mode.
Parameter configuration: With MODE the parameter to be displayed is selected, and with UP and DOWN its value is modified. With ON / OFF the parameter settings are sold, returning to the normal operating mode. See annex for configurable parameters of the REG FILTER regulator.
• UP:
Short / long press: Automatic mode: Increases the pressure setpoint (0Pa-10000Pa).
Manual mode: Increase the speed setpoint (0% -100%).
• DOWN:
Short / long press: Auto mode: Decreases the pressure setpoint (10000Pa-0Pa).
Manual mode: Decreases the speed setpoint (100% -0%).
Note: If MODE + UP is pressed continuously when powering the regulator, or after a reset, it returns to the values by defect (showing dEFEC on the screen).