JF 300 T2/T4 UN CONFORT
Loading...
Design point
Loading...
Service point
Loading...
Alternative point
fan image
Model
JF 300 T2/T4 UN CONFORT
Code
274300296ST

JF 300 T2/T4 UN CONFORT

CIRCULAR AXIAL JET FAN CONFORT

MANUFACTURING FEATURES:

The JF models are composed of an axial fan and two silencers.

FAN:
• Axial fan with galvanized steel casing. The connection box is accessible by the side from a removable door.
• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation,  Standard voltages 230/400V 50Hz for 1 speed motors and 400V 50Hz for 2 speed motors.

SILENCERS:
• Casing in galvanized steel. Inner duct made of perforated galvanized steel sheet. The silencers are filled with mineral wool with high acoustic absorption properties, preventing most of the fan noise to be propagated.
• Unidirectional JF CONFORT UN is equipped with a protection guard at the inlet side and a deflector at the outlet. The deflector directs the air away from the ceiling and obstacles like beams or ducting, sweeping the whole volume of air to the closest extraction point.
• Reversible JF CONFORT RE is equipped with protection guards on both sides.

APPLICATIONS:

• Conceived for car parkings and large spaces where polluted air, or smoke from an accidental fire, needs to be removed effectively. An optimized design minimizes the height needed for their installation and assures a silent operation.
• Maximum working temperature: 60ºC.

 

Fan

Max flow
4500 m³/h
Weight
60 Kg

JF 300 T2/T4 UN CONFORT

Dimensions scheme
A B C D E F G H I ØK L M J Thrust (N)
2415 590 340,5 1025 550 464 334 506 233 15 122 365 20 25/6

JF 300 T2/T4 UN CONFORT

Electrical scheme

JF 300 T2/T4 UN CONFORT

Model
INT 400 25A 6P
Code
508902502
Information
SAFETY SWITCH FOR 400ºC/2h

Safety switch for local disconnection of 400ºC/2h ventilation equipments according to UNE-EN 12101-3.
Suited for direct control of motor in AC 3 operation category
Equips two auxiliary contact.

Model
AVT (GENERIC)
Code
Information
CEILING ANTI-VIBRATION SPRING BLOCK

MANUFACTURING FEATURES
Anti-vibration spring block specifically designed for the lifting of equipment, with large overloads, rotating at more than 550 rpm. and for the support of gas or fluid pipes, air ducts and ventilation or air conditioning machinery.
Zinc plated finish that protects against corrosion. Rubber base. Tolerances according to ISO 3302

APPLICATIONS
Support of Equipment for the support of gas or fluid pipes, air ducts and ventilation or air conditioning machinery.