HJBM 50 0,75kW EEC (1420RPM)
Loading...
Design point
Loading...
Service point
Loading...
Alternative point
fan image
Model
HJBM 50 0,75kW EEC (1420RPM)
Code
268501103

HJBM 50 0,75kW EEC (1420RPM)

WALL MOUNTED FAN WITH SQUARE FRAME, VARIABLE PITCH BLADES AND ELECTRONIC MOTOR

MANUFACTURING FEATURES

• Square plate made of galvanized steel sheet.
• Variable pitch angle polyamide impeller reinforced with fibreglass.
• Supplied with motor support and protection guard according to the ROHS 2002/95/EC Directive (Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipments).
• PM brushless motor (permanent magnets), synchronous, electronically commutated, high efficiency and low sound level. Specially designed for fans with electronic operation and control in deported box IP65.
    Working range: from 400 to 1200-2000rpm (depending on the models)
    Motor with IP54 protection and class F insulation. IP 65 drive case
    Power: 220V ± 10% single phase
    Power frequency: 50 / 60Hz
    Operating temperature range: -20ºC to 50ºC
    Speed ​​control through signal 0-10V or PWM

APPLICATIONS
Designed for wall assembly, they are suitable for:
• Air renewal for all kind of buildings and industries.

UNDER REQUEST
• B form impeller (air flow from impeller to motor).
• Aluminium impeller.

Fan

Max flow
9100 m³/h
Weight
18 Kg

Motor

Power
0,75 kW
RPM Motor
1420
I max. 230 V
6

HJBM 50 0,75kW EEC (1420RPM)

Dimensions scheme
A B C D E ØF ØG
655 615 278 158 120 508 11

HJBM 50 0,75kW EEC (1420RPM)

Electrical scheme

HJBM 50 0,75kW EEC (1420RPM)

Model
INT 25 3P A
Code
INT253PA
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped with an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
RP0 50
Code
980000050
Information
Outlet protection guard for axial fans

MANUFACTURING FRATURES

• Protection grid on the outlet side to avoid the entry of objects and contact with the impeller.
• Made of welded metal wire.
• According to ROHS 2002/95/EC Directive.

UNDER REQUEST

• Stainless guard 304 or 316 with electro-polished finishing coat.

Model
PCP 50
Code
963240106
Information
PLASTIC GRAVITY SHUTTER

Gravity shutter.
The shutter will open by air force and will close when the fan is stopped.
Made of ABS plastic.
UV rays protected.
Note: Maximum air speed 16 m/s

Model
REGC
Code
FX263300
Information
SPEED CONTROLLER FOR EEC MOTOR

MANUFACTURING FEATURES

• Speed remote controller for EEC motors.
• Adjusts the flow rate in a range from 0 to 100% at a maximum distance of 10m.
• It can be recessed or mounted on a wall. Can be installed outdoors.
• Working temperature from 0 to 40ºC.

Model
PC2 50
Code
PC25050
Information
ALUMINIUM GRAVITY SHUTTER

• Overpressure backward damper for facade made of extruded aluminum and standard natural aluminum finishing.
• It incorporates weatherstrip in the fins to achieve greater efficiency in the closure and noise damping.
• Maintains overpressure or depression inside a room with respect to the outside or other adjacent rooms.
• Drills incorporated in frame for wall or duct fixing with screws or rivets.
• Recommended maximum air passage speed 6m/s. maximum temperature of 80ºC.

HJBM 50 0,75kW EEC (1420RPM)

Spare parts scheme
Code Family Name Qty
1 H50006340PSTD IMPELLER 500:AP0:6 G40 D19 x1
3 268501907 PROTECTION GRID HJBM EEC50 x1

HJBM 50 0,75kW EEC (1420RPM)