KUVIO 100 T

HIGH EFFICIENCY IN-LINE MIXED FLOW FAN MADE OF FIRE RESISTANT PLASTIC RESIN

MANUFACTURING FEATURES
• High-efficiency in-line mixed flow fan with motor supports, inlet and impeller built in fire-resistant plastic resin, class E2, according to ISO EN 11925-2:2010, in areas close to the motor and electrical components.
• The side cones incorporate the fan anchoring supports on the surface in order to guarantee a quick and safe installation. Designed to allow the assembly or disassembly of the fans without manipulating the ducts.
• Standard version and version with timer (T).
• Induction motor, thermally protected, with shaft mounted on ball bearing supports, coupled to a mixed flow impeller. Two-speed (sizes 100 to 160) and three-speed (sizes 200 to 315) single-phase motor with thermal overload disconnection and shafts that activate ball bearings to guarantee long-term continuous work (at least 30,000 hours at the maximum temperature of the plate). Standard voltages 220-240V 50Hz and 60Hz. Adjustable speed with Casals speed devices.
• Protection degree from IP44 to IPX5, depending on the model (if installed in a conduit).
• IMQ Safety certificate to guarantee electromagnetic compatibility.
• Maximum continuous working temperature: 50ºC.

| APPLICATIONS
Designed for duct supply and exhaust ventilation systems that require excellent response in terms of high pressure and air flow, while keeping noise under control.
It can be used in many small and medium ventilation installations for air renewal such as:
• Bathrooms and changing rooms.
• Commercial offices.
• Extraction in domestic kitchens after the extraction hood.
• Schools
• Waiting room.
• Commercial premises, laundries, shops, bars, restaurants etc.

Fan

Max flow

260 m³/h

Weight

2.3 Kg

Motor

Power

0,02/0,023 kW

RPM Motor

2030/1520

I max. 230 V

0,09/0,11

KUVIO 100 T

Design point

Service point

Degrees

RPM

Temp. max. (ºC)

Q (m³/h)

Ps (Pa)

Pd (Pa)

Pt (Pa)

Speed air (m/s)

Security coefficient

Mechanical total efficiency (%)

Total efficiency (%)

Pw_mec

Pw_mec (kW)

Pw_abs (kW) 1.2 Kg/m³

Pw_recom (kW)

Alternative point

KUVIO 100 T

A	B	C	D	E	F	G	H	L	M
188.5	211	303	96	101.5	189	90	60	80	5,5

KUVIO 100 T

Model

REG 1,5A

Code

960710015

Information

MANUAL SINGLE PHASE SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for sinus wave speed control. Only available for single phase fans.
• Terminal wiring.
• Minimum speed adjustable and potentiometer speed control.
• Sealed box IP-54 box. Light switch pilot.
• EMC filter according to the En55014 Standard.

Model

INT 3V 3A

Code

960000603

Information

SPEED SELECTOR SWITCH

4 steps (0-1-2-3) start-stop switch selector. Specially designed for 3 speeds fans.

Model

SILC-MINI 100

Code

SILCM100

Information

CIRCULAR SOUND ATTENUATOR IN GALVANISED STEEL

The sound attenuators are used to absorb the noise in air conditioning or ventilation ducts.

Casing in galvanised steel, thickness 0,8 mm;
Mounting flange with quick attack;
Acoustic material in mineral wool 50 Kg /m³ with protection against erosion by glass fibre fire resistance M0 and extended metal sheet

UNDER REQUEST:

Stainless steel execution

Model

BDC Ø 100

Code

BDC100

Information

BACKDRAUGHT SHUTTER

Galvanized sheet-metal backdraught shutter with aluminium fins and return springs to install in the discharge of the fans. They prevent odors, air currents, water penetration due to rain when the fans are off and prevent heating leaks when the extractor does not work.