fan image
Model
KUVIO 150 T
Code
KUV150T

KUVIO 150 T

HIGH EFFICIENCY IN-LINE MIXED FLOW FAN MADE OF FIRE RESISTANT PLASTIC RESIN

MANUFACTURING FEATURES
• High-efficiency in-line mixed flow fan with motor supports, inlet and impeller built in fire-resistant plastic resin, class E2, according to ISO EN 11925-2:2010, in areas close to the motor and electrical components.
• The side cones incorporate the fan anchoring supports on the surface in order to guarantee a quick and safe installation. Designed to allow the assembly or disassembly of the fans without manipulating the ducts.
• Standard version and version with timer (T).
• Induction motor, thermally protected, with shaft mounted on ball bearing supports, coupled to a mixed flow impeller. Two-speed (sizes 100 to 160) and three-speed (sizes 200 to 315) single-phase motor with thermal overload disconnection and shafts that activate ball bearings to guarantee long-term continuous work (at least 30,000 hours at the maximum temperature of the plate). Standard voltages 220-240V 50Hz and 60Hz. Adjustable speed with Casals speed devices.
• Protection degree from IP44 to IPX5, depending on the model (if installed in a conduit).
• IMQ Safety certificate to guarantee electromagnetic compatibility.
• Maximum continuous working temperature: 50ºC.

| APPLICATIONS
Designed for duct supply and exhaust ventilation systems that require excellent response in terms of high pressure and air flow, while keeping noise under control.
It can be used in many small and medium ventilation installations for air renewal such as:
• Bathrooms and changing rooms.
• Commercial offices.
• Extraction in domestic kitchens after the extraction hood.
• Schools
• Waiting room.
• Commercial premises, laundries, shops, bars, restaurants etc.

Fan

Max flow
560 m³/h
Weight
3 Kg

Motor

Power
0,04/0,058 kW
RPM Motor
2100/1580
I max. 230 V
0,18/0,26
KUVIO 150 T
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

KUVIO 150 T

Dimensions scheme
A B C D E F G H L M
214.5 234 294 146 112.5 212 110 60 80 5,5

KUVIO 150 T

Electrical scheme

KUVIO 150 T

Model
REG 1,5A
Code
960710015
Information
MANUAL SINGLE PHASE SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for sinus wave speed control. Only available for single phase fans.
• Terminal wiring.
• Minimum speed adjustable and potentiometer speed control.
• Sealed box IP-54 box. Light switch pilot.
• EMC filter according to the En55014 Standard.

Model
INT 3V 3A
Code
960000603
Information
SPEED SELECTOR SWITCH

4 steps (0-1-2-3) start-stop switch selector. Specially designed for 3 speeds fans.

Model
SILC-MINI 160
Code
SILCM160
Information
CIRCULAR SOUND ATTENUATOR IN GALVANISED STEEL

The sound attenuators are used to absorb the noise in air conditioning or ventilation ducts.

Casing in galvanised steel, thickness 0,8 mm;
Mounting flange with quick attack;
Acoustic material in mineral wool  50 Kg /m³ with protection against erosion by glass fibre fire resistance M0 and extended metal sheet

 UNDER REQUEST:

Stainless steel execution

Model
BDC Ø 150
Code
BDC150
Information
BACKDRAUGHT SHUTTER

Galvanized sheet-metal backdraught shutter with aluminium fins and return springs to install in the discharge of the fans. They prevent odors, air currents, water penetration due to rain when the fans are off and prevent heating leaks when the extractor does not work.

Model
VISC Ø150
Code
VISC150
Information
CIRCULAR OUTDOOR FLANGE WITH BIRD GUARD

MANUFACTURING FEATURES

• Circular outdoor flange with bird guard made of galvanized steel.