50 Hz
DESCENTRALIZED RESIDENTIAL RECOVERY UNIT
MANUFACTURING FEATURES
• Decentralized residential recovery unit for singlestay use.
• Can be installed on perimeter walls between 300mm and 700mm thick. Diameter Ø160 mm for duct.
• Fans with EC motor, to guarantee very low consumption, driven by low voltage, with shafts mounted on ball bearings.
• VMC unit for a single room, with alternating flows, with a very high efficiency heat recovery unit (up to 90%) and a ceramic honeycomb exchanger.
• Filters ISO Coarse≥50% (G3) (ISO ePM10≥50% - M5- optional).
• Degree of protection from dust and water: IPX4.
• Electrical insulation class: II (earthing is not required).
SOME CONTROL FUNCTIONS
• Integrated selector with 3 operating modes:
• Ventilation with heat recovery, air extraction and air supply.
• Integrated selector with 5 adjustable speeds from 18 to 40 m³/h.
• Integrated led light for filter status: led off for clean filters and led on for dirty filters that need to be replaced.
APPLICATIONS
• Decentralized ventilation unit with heat recovery function, specifically designed for air exchange in residential spaces characterized by high levels of thermal insulation.
• For rooms up to 20m².
| A | B | C | D | E | F | G | H | ØI | ØJ | ØK | ØL |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 240 | 224 | 113 | 95 | 49 | 275 | 42 | 18 | 151 | 146 | 153 | 216 |
MANUFACTURING FEATURES
• Speed remote controller for EEC motors.
• Adjusts the flow rate in a range from 0 to 100% at a maximum distance of 10m.
• It can be recessed or mounted on a wall. Can be installed outdoors.
• Working temperature from 0 to 40ºC.
Rigid PVC pipe (diameter 160 and length 700 mm) for wall mounting.
Metal panel “windbreak” for exterior in stainless steel sheet.
External rubber grille that can be installed from the inside wthi out the need for scaffolding.
90° Circular / Square Adapter for entry and exit through a window jamb.
Rectangular stainless steel grill for ACC window adapter kit
Rectangular grid in powder-coated stainless steel, white RAL 9003, for kit.
Sensor to control the air temperature in the room: allows automatic start or speed change of the combined product when the temperature exceeds the preset value, selectable by external trimmer and adjustable in the range 10°C - 40°C. A timer allows the appliance to operate for a predetermined time, which can be set during installation from 3 to 20 minutes, after the temperature has dropped below the predetermined threshold.
Single-phase 220-240V / 50- 60 Hz power supply. Wall installation.
The color white.
Maximum allowable load: 3A.
Enclosure for wall installation with IP20 protection.
Sensor for controlling the rate of relative humidity (RH) in the air: allows automatic start or speed switching of the combined product when the percentage of RH exceeds 65%. If the humidity does not exceed the threshold, the associated appliance turns on automatically a few seconds after the light is turned on and continues to operate, after it is turned off, for a preset time, which can be set during installation from 3 to 20 minutes .
Single-phase power supply 220-240 V / 50-60 Hz. Wall installation. The color white.
Maximum admissible load: 3 A.
Enclosure for wall installation with IP20 protection.
Sensor para el control de la tasa de humedad relativa
+34 972 720 150
Specific manual