fan image
Model
MBPV 25 T2 0,37kW
Code
510602515

MBPV 25 T2 0,37kW

ROOF FAN WITH BACKWARD IMPELLER AND PLASTIC CONSTRUCTION 

MANUFACTURING FEATURES:

• PE moulded housing and base (until size 45) and PP welded housing and base (for upper models).
• Backward impeller with self-cleaning system in PP welded plastic.
• Stainless steel nuts and bolts.
• Standard asynchronous squirrel-cage motor, IP-55, class F insulation. Standard voltages 230/400V 50Hz for motors until 4kW and 400/690V 50Hz for higher motors

APPLICATIONS:

Designed for roof installation, they are suitable for:
• Corrosive air transport.
• Chemical and petrochemical industry.
• Laboratories and gas cabinets.

• Maximum temperature of transported air: If it is clean air 70ºC, other depends on the gas (see table in documentation)

UNDER REQUEST:

• Single phase motors (up to 1,1Kw).
• 60Hz fans and special voltages fans.
• 2 speed motors.

Fan

Max flow
1750 m³/h
Weight
13 Kg

Motor

Power
0,37 kW
RPM Motor
2800
I max. 230 V
1,58
I max. 400 V
0,91
Size
71
Weight
5.7 Kg
MBPV 25 T2 0,37kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

MBPV 25 T2 0,37kW

Dimensions scheme
A B C D E F I L M N O
500 450 185 200 460 50 230 265 540 80 8 490

MBPV 25 T2 0,37kW

Electrical scheme

MBPV 25 T2 0,37kW

Model
INT 25 3P A
Code
INT253PA
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
BA-400 20
Code
960002066
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.

Model
FJ Ø200
Code
FJ-200
Information
PVC FLEXIBLE JOINT

Flexible joint made of PVC

Model
CSC Ø200
Code
CSC200
Information
CIRCULAR GRAVITY DAMPER

PVC/PP Gravity damper

Model
AD Ø200
Code
AD-200
Information
ADJUSTABLE DAMPER

Manual adjustable damper made of PVC/PP

Model
RPI Ø200
Code
RPI200
Information
STAINLESS STEEL PROTECTION GRID

Stainless steel protection grid

Model
SFC 230 I 2,5A *
Code
SFC230I003
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

Model
SFC 400 III 1,2A *
Code
SFC400III1
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current