fan image
Model
MBPV 56 T4 4kW
Code
510605659

MBPV 56 T4 4kW

ROOF FAN WITH BACKWARD IMPELLER AND PLASTIC CONSTRUCTION 

MANUFACTURING FEATURES:

• PE moulded housing and base (until size 45) and PP welded housing and base (for upper models).
• Backward impeller with self-cleaning system in PP welded plastic.
• Stainless steel nuts and bolts.
• Standard asynchronous squirrel-cage motor, IP-55, class F insulation. Standard voltages 230/400V 50Hz for motors until 4kW and 400/690V 50Hz for higher motors

APPLICATIONS:

Designed for roof installation, they are suitable for:
• Corrosive air transport.
• Chemical and petrochemical industry.
• Laboratories and gas cabinets.

• Maximum temperature of transported air: If it is clean air 70ºC, other depends on the gas (see table in documentation)

UNDER REQUEST:

• Single phase motors (up to 1,1Kw).
• 60Hz fans and special voltages fans.
• 2 speed motors.

Fan

Max flow
12900 m³/h
Weight
150 Kg

Motor

Power
4 kW
RPM Motor
1440
I max. 230 V
14,5
I max. 400 V
8,32
Size
112M
Weight
35.8 Kg
Efficiency
86.6 %
FP
0.8
MBPV 56 T4 4kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

MBPV 56 T4 4kW

Dimensions scheme
A B C D E F I L M N O
1150 1050 430 450 800 80 560 600 900 70 10 850

MBPV 56 T4 4kW

Electrical scheme

MBPV 56 T4 4kW

Model
INT 25 3P A
Code
INT253PA
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
BA-400 45
Code
960002055
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.

Model
SFC 400 III 12A *
Code
SFC400III12
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

Model
FJ Ø450
Code
FJ-450
Information
PVC FLEXIBLE JOINT

Flexible joint made of PVC

Model
AD Ø450
Code
AD-450
Information
ADJUSTABLE DAMPER

Manual adjustable damper made of PVC/PP

Model
CSC Ø450
Code
CSC450
Information
CIRCULAR GRAVITY DAMPER

PVC/PP Gravity damper