50 Hz
WALL FAN , VARIABLE PITCH BLADES
MANUFACTURING FEATURES:
• Plate axial fan with circular reinforced frame.
• Motor-impeller modular assembly for complete versatility.
• Corrosion-resistant powder coat polyester resin..
• Standard asynchronous squirrel-cage motor with IP-55 protection and Class F insulation. Manufactured with standard voltages: 230V 50Hz for single phase motors, 230/400V 50Hz for three phase motors up to 4kW and 400/690V 50Hz for higher powers 1 speed and 400V for 2 speed motors.
• HBA : Cast aluminum impeller with variable pitch angle. The standard configuration is Form-B (airflow from impeller to motor) for C1:6 & C2:6 profiles and Form-A (airflow from motor to impeller) for the remaining models.
APPLICATIONS:
Designed for wall or duct installation, they are suitable for:
• Air renewal in buildings and industries.
• Maximum working temperature: 1ph 50ºC, 3ph 60ºC.
UNDER REQUEST:
• Form-A for C1:6 & C2:6 profiles and Form-B for the remaining models
• 100% reversible impeller.
• 60Hz fans and special voltages.
• Hot-dipped galvanized or stainless steel housing.
• Fan to move air up to 100ºC.
| Fan sheet |
|||
|---|---|---|---|
| Fan type |
Axial fan |
||
| Installation category |
A | Fan in free inlet and free outlet conditions, and with a partition between the inlet and outlet areas |
|
| Efficiency category |
Static | ||
| VF | No | ||
| Values | Requirements 2026 | ||
| Max. efficiency (%) |
37.55 | 32.58 | |
| Efficiency grade (N) |
54.97 | 50 | |
| Absorbed power (kW) | 0.219 | ||
| Flow (m³/h) |
2672.88 | ||
| Static pressure (Pa) |
109.99 | ||
| Speed (rpm) |
|||
| Specific ratio |
1.00 | ||
+34 972 720 150