BOX RLQ PLUS
Model
BOX RLQ PLUS 315 T2 1,1kW
Code
246310106Q

BOX RLQ PLUS 315 T2 1,1kW

VENTILATION BOX WITH BACKWARD IMPELLER

MANUFACTURING FEATURES

• Ventilation box with 30 mm aluminum profile structure, nylon corners, galvanized sandwich panels with internal insulation rockwool (25mm thickness) class A1 (non-combustible) of 90kg/m3 density. All panels are equipped with "fastening system" for the quick assembly and disassembly whenever required, either for cleaning, maintenance or exchanging of panels.
• Centrifugal fan with motor coupled directly to the impeller.
• Circular suction mouth to facilitate duct connection. Open lateral drive.
• Standard squirrel cage asynchronous motor, with IP-55 protection and class F insulation. Voltages 230/400V 50Hz for three-phase motors.
• Backward curved single inlet impeller of high performance with self-cleaning system made of steel. Balanced statically and dynamically at origin.
• Interchangeable panels.
• Motor B5 construction located outside the air flow, on the back of the box there is a grid to allow the entry of air to facilitate the cooling of the engine.

APPLICATIONS

Designed for inline installation, they are suitable for:

• Air renewal in buildings and industries.
• Smoke extraction.
• Maximum temperature of transported air: 80ºC.
• Maximum environment temperature: 60ºC.

Fan

Max flow
4410 m³/h
Weight
64 Kg

Motor

Power
1,1 kW
RPM Motor
2800
I max. 230 V
4,05
I max. 400 V
2,33
Size
80
Weight
16 Kg
Efficiency
82.7 %
FP
0.85
BOX RLQ PLUS 315 T2 1,1kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

BOX RLQ PLUS 315 T2 1,1kW

Dimensions scheme
A B C D E G H I J ØF
525 525 525 465 465 45.5 262,5 30 174,5 298

BOX RLQ PLUS 315 T2 1,1kW

Electrical scheme

BOX RLQ PLUS 315 T2 1,1kW

Model
INT 25 3P A
Code
INT253PA
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
BA-400 30/31
Code
960002052
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.

Model
JE 45
Code
A-300719201
Information
ANTI-VIBRATION JOINT

MANUFACTURING FEATURES

• Flexible joint to clinch the fan to the duct.
• Avoids transmission of vibrations for circular and rectangular connection.
• Dimensions: two metallic flanges of 45mm each one and a flexible flange of 60mm.
• The reel is 30,5m lenght.
• Maximum pressure: 20 mmca.
• Fire resistance M0 from -50ºC to +200ºC in continuous and 400ºC/2h.

Model
SFC 230 I 4,2A *
Code
SFC230I004
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

Model
SFC 400 III 3,6A *
Code
SFC400III4
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

BOX RLQ PLUS 315 T2 1,1kW

Spare parts scheme
Code Family Name Qty
1 960003209 FLANGE AC-315 x1
2 R-279311680 INLET CONE ED11 315 x1
3 R-279319381 TURBINE THRE R63B1 315X90x14 RD x1
4 721001041 MOTOR 1,1KW T2 B5 230/400V x1