fan image
Model
MBPC 40 T2 5,5kW
Code
502304034

MBPC 40 T2 5,5kW

MEDIUM PRESSURE FAN WITH FORWARD IMPELLER AND IN PLASTIC CONSTRUCTION

MANUFACTURING FEATURES:

•Housing made of PP plastic (for models size 35 and equal to or greater than size 45) other models PE casing
• Forward curved impeller in PP plastic.
• Motor support made of rolled steel sheet with polyester powder finishing coat.
• Stainless steel nuts and bolts.
• Standard asynchronous squirrel-cage motor, IP-55, class F insulation. Standard voltages 230/400V 50Hz.

• Available positions (to be indicated in case of order): LG270, LG0, LG45, LG90, LG135, LG180, LG225, LG315, RD0, RD45, RD90, RD135, RD180, RD225, RD270, RD315.
• The indicated codes correspond to the model in position LG270

APPLICATIONS:

Designed for inline installation, they are suitable for:
• Corrosive air transport.
• Chemical and petrochemical industry.
• Laboratories and gas cabinets.
• Maximum temperature of transported air: If it is clean air 70ºC, other depends on the gas (see table in documentation)

UNDER REQUEST:

• Single phase motors (up to 1,1kW).
• 60Hz  fans and special voltages fans.
• 2 speed motors.
• Stainless steel motor support.
• Casing made of PP (for models taht is not a standard material).

Fan

Max flow
5600 m³/h
Weight
50 Kg

Motor

Power
5,5 kW
RPM Motor
2910
I max. 400 V
10,6
I max. 690 V
6,14
Size
132S
Weight
68 Kg
Efficiency
89.2 %
FP
0.85
MBPC 40 T2 5,5kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point

MBPC 40 T2 5,5kW

Dimensions scheme
A B C E F G H I L N ØS P Q R
290 380 40 250 194 265 80 495 330 365 330 11 270 315 365

MBPC 40 T2 5,5kW

Electrical scheme

MBPC 40 T2 5,5kW

Model
INT 25 3P A
Code
INT253PA
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
BA-400 25
Code
960002051
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Certified according to the European standard EN 12101-3 400ºC/2h. Fire classification: M0.

Model
FJ Ø250
Code
FJ-250
Information
PVC FLEXIBLE JOINT

Flexible joint made of PVC

Model
DG Ø250
Code
DG250
Information
DIFUSOR GRID

Outlet with grid PVP/PP

Model
CSC Ø250
Code
CSC250
Information
CIRCULAR GRAVITY DAMPER

PVC/PP Gravity damper

Model
AD Ø250
Code
AD-250
Information
ADJUSTABLE DAMPER

Manual adjustable damper made of PVC/PP

Model
PD 1
Code
PD1
Information
DRAIN PLUG

Drain plug made of PP

Model
RPI Ø250
Code
RPI250
Information
STAINLESS STEEL PROTECTION GRID

Stainless steel protection grid

Model
WS 1
Code
WS1
Information
WALL SUPPORT

Wall support

(the code correspons to 2 units)

Model
AV 2
Code
AV-2
Information
ANTI-VITRATION BLOCK

Vibration absorbers KIT

Model
SFC 400 III 12A *
Code
SFC400III12
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

MBPC 40 T2 5,5kW

Spare parts scheme
Code Family Name Qty
2 T02304034 TURBINE MBPC 40 T2 5,5kW LG x1