Product out of catalogue
HTE 45 T4 0,37kW
Loading...
Design point
Loading...
Service point
Loading...
Alternative point
fan image
Model
HTE 45 T4 0,37kW
Code
2674560640

HTE 45 T4 0,37kW

AXIAL WITH FIBERGLASS COWL

MANUFACTURING FEATURES
• Roof cowl made of reinforced fiberglass.
• Roof base support and bird protection guard with polyester powder finishing coat.
• Assembled on HJBM fans.
• Variable pitch angle (stopped and in origin) polyamide impeller reinforced with fibreglass.
• Squirrel cage asynchronous standard motor, IP-55 protection and rated class F insulation. Standard voltages 230V 50Hz for single phase motors, 230/400V 50Hz and for three phase motors.

APPLICATIONS:

Specially designed for roof installation, they are suitable for:
• Air renewal in buildings and industries.
• Smoke extraction.
• Maximum working temperature: single phase 50ºC, three phase 60ºC.

AVAILABLE ON REQUEST

• B Form impeller (air flow from impeller to motor).
• Special voltages
• 100% reversible impeller.
• Aluminium impeller.

Fan

Max flow
5310 m³/h
Weight
28 Kg

Motor

Power
0,37 kW
RPM Motor
1370
I max. 230 V
1,86
I max. 400 V
1,07
Size
71
Weight
6.2 Kg
Efficiency
69.5 %

HTE 45 T4 0,37kW

Dimensions scheme
A B C D E G H
592 255 125 40 172 960 710 590 14

HTE 45 T4 0,37kW

Electrical scheme

HTE 45 T4 0,37kW

Model
INT 25 3P A
Code
INT253PA
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
AC 450
Code
960003213
Information
CONECTION FLANGE

MANUFACTURING FEATURES

• For axial (inlet and outlet) and centrifugal (inlet) fans.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
JE 45
Code
300719201
Information
ANTI-VIBRATION JOINT

MANUFACTURING FEATURES

• Flexible joint to clinch the fan to the duct.
• Avoids transmission of vibrations for circular and rectangular connection.
• Dimensions: two metallic flanges of 45mm each one and a flexible flange of 60mm.
• The reel is 30,5m lenght.
• Maximum pressure: 20 mmca.
• Fire resistance M0 from -50ºC to +200ºC in continuous and 400ºC/2h.

Model
BAD 12
Code
960003462
Information
CIRCULAR-CIRCULAR ANTI-VIBRATION FLANGE

MANUFACTURING FEATURES

• Circular-circular coupling flange through anti-vibration canvas.
• Fire resistance M0: from -50ºC to +200ºC in continuous and 400ºC/2h

Model
BTI 635
Code
50870635XX
Information
INCLINED ROOF FAN SUPPORT

MANUFACTURING FEATURES

• Inclined support for roof fans CTH3, CTH4, HTE, and the resulting fans combining with the KIT TE and KIT TM

In the code, indicate the pitch instead of "XX"

UNDER REQUEST

• Specific inclination.

Model
SFC 230 I 2,5A *
Code
SFC230I003
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

Model
SFC 400 III 1,2A *
Code
SFC400III1
Information
FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current

HTE 45 T4 0,37kW

Spare parts scheme
Code Family Name Qty
1 269354471 ROOF COWL HTE-HMTE 45 x1
2 269451772 BASE HMTE-HTE 45 x1
3 H45006240PSTD IMPELLER 450:AP0:6 G40 D14 x1