60 Hz
CENTRIFUGAL JET FAN CONFORT
MANUFACTURING FEATURES
Centrifugal powerful jet fan with low profile.
FAN
• Galvanized steel sheet casing.
• Strong backward impeller with self-cleaning system made of strong galvanized steel sheet.
• External wiring box.
• Inlet protection.
• Feet included.
MOTOR
• Class F insulation, S1 continuous, with bearing balls, IP-55 protection.
• 400V 4/8 poles Dalhander three phase motor for 2 speeds models ans 230/400V 4 poles for 1 speed models.
• Working temperature between -20ºC +60ºC.
UNDER REQUEST
Special voltages
| A | B | C | D | E | F | H | I | K | L | Thrust (N) |
|---|---|---|---|---|---|---|---|---|---|---|
| 1600 | 300 | 1000 | 351,5 | 1093 | 1052 | 800 | 250 | 13 | 4 | 75 |
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
Safety switch for local disconnection of 400ºC/2h ventilation equipments according to UNE-EN 12101-3.
Suited for direct control of motor in AC 3 operation category
Equips two auxiliary contact.
MANUFACTURING FEATURES
• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.
*Dial panel incorporated. Optional EMC filter.
Certifications: CE/UL/CSA/EN/GOST/CCC.
Protection index IP20.
The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.
SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III
EMC filter incorporated for models from 47A (included)
*Lineal load rated current
**Quadratic load rated current
MANUFACTURING FEATURES
• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.
*Dial panel incorporated. Optional EMC filter.
Certifications: CE/UL/CSA/EN/GOST/CCC.
Protection index IP20.
The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.
SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III
EMC filter incorporated for models from 47A (included)
*Lineal load rated current
**Quadratic load rated current
MANUFACTURING FEATURES
Anti-vibration spring block specifically designed for the lifting of equipment, with large overloads, rotating at more than 550 rpm. and for the support of gas or fluid pipes, air ducts and ventilation or air conditioning machinery.
Zinc plated finish that protects against corrosion. Rubber base. Tolerances according to ISO 3302
APPLICATIONS
Support of Equipment for the support of gas or fluid pipes, air ducts and ventilation or air conditioning machinery.
+34 972 720 150
Manual