60 Hz
EXTERNAL ROTOR MOTOR AND FORWARD IMPELLER FAN
MANUFACTURING FEATURES:
• Welded rolled steel housing.
• Laminated steel sheet simple inlet forward curved impeller for model MDE (110V) 130; in polypropylene for model MDE (110V) 120.
• Inlet protection guard included.
• Polyester powder finishing coat.
• Asynchronous external rotor with IP-44 protection and Class H insulation according to the DIN 40.050 h1 Standard; ball bearings greased for life. Standard voltages: 120V 60Hz
APPLICATIONS:
Designed for inline installation, they are suitable for:
• Industrial applications, extraction or injection of air.
• Cooling of machines and parts.
• Clean air transport.
• Maximum working temperature: 50ºC.
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
Structure made of extruded aluminum profiles available in different dimensions according to the panel to be installed and the fan volume. The profiles joining is made of polyamide corners, which gives them great strength and the possibility of disassembling the structure into pieces.
Panels can be made of a single sheet with inner insulation of 10 mm thick polyethylene foam, or 2 sheets (sandwich panel) with thicknesses of 25 mm or 50 mm, depending on the required attenuation degree.
The sheets of each panel can be galvanized steel, galvanized steel with coloured plastic coating or stainless steel.
The lower part is finished off with a structure / plinth for transport and handling, made of galvanized sheet or upn-80/100 joist, depending on the cabin dimensions and weight.
The air inlets and outlets of the cabin have anti-vibration tarpaulins coupled to mounted fans. These fans rest on a floating base with acoustic dampers.
RRP to consult.
+34 972 720 150