60 Hz
IN LINE SYSTEM FOR AIR CLEANING AND RENOVATION IN HEALTHCARE ENVIRONMENTS
MAIN FUNCTION
• The efficiency of air renewal indicates the distribution efficiency of fresh air in the room, while the ventilation efficiency indicates the removal efficiency of airborne contaminants in the room. The efficiency of air renewal can be calculated from the hourly air changes
and the mean air age of the room.
• Lack of ventilation or low ventilation rates are associated with higher rates of infection or outbreaks of airborne diseases. A higher ventilation rate can provide a better dilution of airborne contaminated Wells cores and consequently reduce the risk of airborne infection (by reducing the viral load in the environment). For this reason, better ventilated areas with CURAT SYSTEM have a lower risk of transmission of COVID19 and other airborne infections. According to the Wells–Riley equation, the probability of infection by infectious Wells cores is inversely proportional to the ventilation rate. 12 renovations/hour just running 10 minutes manage to dilute Wells cores more than 70%.
• The CURAT SYSTEM is an integrated solution designed to ensure the level of indoor air quality (IAQ) by renewing and filtering the air in the room. Specially thought to guarantee the leakages of the air renewal in rooms or rooms with patients with contagious diseases that are easily spread by air.
APPLICATIONS
• Exhaust of contaminated air and clean air supply free of polluting agents (particles, micro-organisms, molecules, bacteria, virus).
• The CURAT BASIC & CURAT RECOVERY systems are designed for inline installation, indoor or outdoor assembly, they are suitable for:
- Air renewal in buildings and industries (Tertiary sector).
- Maximum working temperature 55ºC.
• The CURAT BASIC HEALTH and CURAT RECOVERY HEALTH systems are designed according to the strictest leakage regulations EN 1886 2006 and are suitable for the following healthcare environments:
- Field hospitals
- Hospital & clinic waiting rooms
- Hospital hallways
- Hospital or clinic rooms
- Dental clinics
- Common areas (reception, pharmacies, warehouses)
MANUFACTURING FEATURES
• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.
*Dial panel incorporated. Optional EMC filter.
Certifications: CE/UL/CSA/EN/GOST/CCC.
Protection index IP20.
The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.
SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III
EMC filter incorporated for models from 47A (included)
*Lineal load rated current
**Quadratic load rated current
Drawers with 1, 2 or 3 stages of in-line filtration for rectangular ducts.
MANUFACTURING FEATURES
• 1mm thick galvanized steel box.
• Suitable for medium and high efficiency filters from MERV 7 (G4) up to MERV 16 (F9).
• The CPCR is available in 2 sizes (S and M) that allow to combine up to 3 different filtration stages, varying only the length of the boxes.
• The height of boxes is always the same. With two in-line S boxes it would be possible to make a CPCR L for 3 stages of filtration with bag filters.
• The CPCR allows duct mounting for all types of filters (compact, dihedral, bags).
UNDER REQUEST
• Stainless steel or painted steel.
• Outdoor mounting: with outdoor flange and cowl.
• Flat or conical connections to adapt the CPCR to a circular duct.
• Assembly of drawers in battery (horizontal or vertical).
• Active Carbon Filters (CA).
• ATEX version: only for the 1 and 2 stage filtration versions. With grounding and equipotential bonding of all the elements of the drawer (The filters are ATEX specific with antistatic polyester frames).
Filtration for air treatment units equipped with a pre-filter upstream, and air-conditioning units.
• High filtration area, high efficiency, compact and economic filter.
• Media: Mini pleat fiberglass paper
• Frame: Galvanized steel
• Maximum T° in continuous service: 100°C
• Humidity: 100% RH
• Tested for food contact according to CE 1935/2004
• Certified for microbial development (ISO 846-VD 6022)
MANUFACTURING FEATURES
• The INT PS series are highly sensitive, adjustable differential pressure switches suitable for monitoring overpressure, vacuum and differential pressure of air or other non-combustible, non-aggressive gases. The switching pressure setpoint can be adjusted by means of a scaled calibrated knob; the switching ΔP - by a screwdriver and a pressure gauge.
• High sensitivity and accuracy
• Product versions for a variety of pressure ranges
• Adjustable switching point (ΔP)
• Long-term mechanical life
Protection standard IP54 (according EN 60529)
Ambient conditions Temperature -20—85 °C, Rel. humidity < 95 % rh (non-condensing)
• Terminal filtration in air treatment units for clean or white room applications and extraction boxes for dangerous and toxic contaminants (asbestos).
• Large air flow with very low initial pressure drop. Solid execution and great finish.
• Mini-folded fibreglass paper stocking.
• Galvanized steel frame.
• Sealant: polyurethane.
• Separator: continuous thermoplastic cords.
• Gasket: Half round monoblock polyurethane.
• Maximum temperature in continuous service 80ºC.
• Relative humidity 70-80%.
• Approved for contact with food according to CE 1935/2004.
• Certified against microbial growth (ISO 846-VD 6022).
PUSH BUTTONS
The regulator has 4 buttons: ON / OFF, MODE, UP and DOWN.
Note: If the backlight is off, the first press turns on the backlight. With the backlight on, the push button functions are as described below.
Basic functions:
• ON OFF:
Short / long press: Select the on / off state of the regulator.
• MODE:
Short press: Selects the auto / manual regulation mode.
Long press: Access parameter mode.
Parameter configuration: With MODE the parameter to be displayed is selected, and with UP and DOWN its value is modified. With ON / OFF the parameter settings are sold, returning to the normal operating mode. See annex for configurable parameters of the REG FILTER regulator.
• UP:
Short / long press: Automatic mode: Increases the pressure setpoint (0Pa-10000Pa).
Manual mode: Increase the speed setpoint (0% -100%).
• DOWN:
Short / long press: Auto mode: Decreases the pressure setpoint (10000Pa-0Pa).
Manual mode: Decreases the speed setpoint (100% -0%).
Note: If MODE + UP is pressed continuously when powering the regulator, or after a reset, it returns to the values by defect (showing dEFEC on the screen).
+34 972 720 150