KENTALFAN 630 T6 3kW

PLUG FAN WITH IEC MOTOR

Medium size plug fan available from Ø315mm to Ø630mm.

It offers flows up to 10,300CFM and pressures up to 1.100Pa.

MANUFACTURING FEATURES

Latest generation impeller made of galvanized sheet metal with built-in diffuser to increase efficiency. Self-cleaning impeller with backward curved (reaction) blades, high performance and single inlet, direct driven. Dynamically balanced to minimize noise and vibration.

Galvanized sheet metal structure for small sizes up to Ø400mm, and the rest of the models in pickled sheet metal painted with black epoxy polyester.

IEC standard asynchronous squirrel cage motor with IP-55 protection and class F electrical insulation. Standard voltages 230V 60Hz{{/60} for single phase motors and 230/400V 60Hz for higher powers.

APPLICATIONS

Ideal to integrate in air conditioners, plenums, compressors, dryers, booths, photovoltaic inverters.

Maximum continuous working temperature: 60ºC.

System prepared to comply with future European efficiency regulations (ErP).

UNDER REQUEST

Other possible fabrications up to 100ºC and up to IP66.

Fan

Max flow

17960 m³/h

Weight

82 Kg

Motor

Power

3 kW

RPM Motor

1152

I max. 230 V

12,7

I max. 400 V

7,3

Size

132S

Weight

57 Kg

Efficiency

89.3 %

0.71

KENTALFAN 630 T6 3kW

Design point

Service point

Degrees

RPM

Temp. max. (ºC)

Q (m³/h)

Ps (Pa)

Pd (Pa)

Pt (Pa)

Speed air (m/s)

Security coefficient

Mechanical total efficiency (%)

Total efficiency (%)

Pw_mec

Pw_mec (kW)

Pw_abs (kW) 1.2 Kg/m³

Pw_recom (kW)

Alternative point

KENTALFAN 630 T6 3kW

±C	A	B	D	E
794.35	901	860	421.55	M10

KENTALFAN 630 T6 3kW

Model

INT 25 3P A

Code

INT253PA

Information

SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model

SFC 400 III 8A *

Code

SFC400III8

Information

FREQUENCY SPEED CONTROLLER

MANUFACTURING FEATURES

• Specially designed for speed frequency control in ventilation applications.
• Ultra compact, simple operation and wide range of functions.

*Dial panel incorporated. Optional EMC filter.

Certifications: CE/UL/CSA/EN/GOST/CCC.

Protection index IP20.

The selection of SFC frequency drive speed controller must be made based on the maximum intensity absorbed by the fan to be regulated. The powers (kW) and the intensity for constant load refer to the normal duty (150% overload for 60 seconds). The intensity for quadratic load admits an overload of 110% during 60s.

SFC 230: Entrance 230V I, exit 230V III
SFC 400: Entrance 400V III, exit 400V III

EMC filter incorporated for models from 47A (included)

*Lineal load rated current

**Quadratic load rated current