50 Hz
MANUFACTURING FEATURES
• Specially designed for sinus wave speed control. Only available for single phase fans.
• Terminal wiring.
• Minimum speed adjustable and potentiometer speed control.
• Sealed box IP-54 box. Light switch pilot.
• EMC filter according to the En55014 Standard.
MANUFACTURING FEATURES
• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.
*Máx. thermal current air (A)
MANUFACTURING FRATURES
• Galvanized protection grid on the outlet side to avoid the entry of objects and contact with the impeller.
MANUFACTURING FRATURES
• Motor side protection guard specially designed for low pressure direct driven fans.
• Manufactured in galvanised steel.
MANUFACTURING FRATURES
• Inlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of galvanised steel models 7,9, 10, 12 and 15. And the rest of models with polyester powder finishing coat.
MANUFACTURING FEATURES
• To be installed in the outlet of low pressure fans (BD, BV) and made the connection to the duct easier.
• Made of galvanized seel.
UNDER REQUEST
• Possible spot welding on fans outlet.
Speed controller for single phase voltage (230 Vac - 50 Hz) controlable motors by varying the supplied voltage through phase angle control.
External enclosure in white-ivory plastic.
Internal enclosure in polyamide.
Maximum environment temperature: 35ºC.
+34 972 720 150