Use of Cookies

We use our own cookies and third-party analytical cookies to analyze your browsing habits and offer you content based on your interests. Please refer to our Cookie Policy for more information. By clicking 'Accept,' you acknowledge that you have been informed and consent to the installation and use of cookies. You can also configure or reject their use by clicking HERE.
Cookies policy

HB 50 T4/T8 (A0:6)

Model
AC 500
Code
960003214
Information
CONECTION FLANGE

MANUFACTURING FEATURES

• For axial (inlet and outlet) and centrifugal (inlet) fans.

UNDER REQUEST

• Versions in stainless 304 and stainless 316.

Model
PCP 50
Code
963240106G
Information
PLASTIC GRAVITY SHUTTER

Gravity shutter.
The shutter will open by air force and will close when the fan is stopped.
Made of ABS plastic.
UV rays protected.
Note: Maximum air speed 16 m/s

Model
BA-400 50
Code
960002064
Information
ANTI-VIBRATING FLANGE 400º/2H

MANUFACTURING FEATURES

• Flexible polyurethane coupling flange with fiberglass fabric to avoid possible vibrations to the installation.
• 160 mm width and supplied with 2 fixing clamps.
• Fire classification: M0.

Model
MC HB 50
Code
960003155
Information
SQUARE MOUNTING FRAME FOR HB FANS

MANUFACTURING FEATURES

• Square support frame for HB fans.
• Made of steel and protected against corrosion with polyester resin powder.

Model
JE 45
Code
A-300719201
Information
ANTI-VIBRATION JOINT

MANUFACTURING FEATURES

• Flexible joint to clinch the fan to the duct.
• Avoids transmission of vibrations for circular and rectangular connection.
• Dimensions: two metallic flanges of 45mm each one and a flexible flange of 60mm.
• The reel is 30,5m lenght.
• Maximum pressure: 20 mmca.
• Fire resistance M0 from -50ºC to +200ºC in continuous and 400ºC/2h.

Model
RP0 500
Code
960001203
Information
Outlet protection guard for axial fans

MANUFACTURING FRATURES

• Protection grid on the outlet side to avoid the entry of objects and contact with the impeller.
• Made of welded metal wire.
• According to ROHS 2002/95/EC Directive.

UNDER REQUEST

• Stainless guard 304 or 316 with electro-polished finishing coat.

Model
BAD 13 (Ø500)
Code
960003463
Information
CIRCULAR-CIRCULAR ANTI-VIBRATION FLANGE

MANUFACTURING FEATURES

• Circular-circular coupling flange through anti-vibration canvas.
• Fire resistance M0: from -50ºC to +200ºC in continuous and 400ºC/2h

Model
INT (GENERIC)
Code
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
RP1 (GENERIC)
Code
Information
INLET PROTECTION GUARD FOR AXIAL FANS

MANUFACTURING FRATURES

• Inlet protection guard to avoid the entry of objects and contact with the impeller.
• Made of welded metal wire.
• According to ROHS 2002/95/EC Directive.

UNDER REQUEST

• Stainless guard 304 or 316 with electro-polished finishing coat.

Model
CMP-HLT 500x500
Code
CMPHLT5050
Information
OVERPRESSURE DAMPER (VERTICAL POSITIONING)

Non-return overpressure damper for façades made of aluminum slats, which opens and closes automatically. It works with the airflow by opening during operation and closing when the fan is closed. L-shaped frame to be directly embedded. It maintains the overpressure or depression inside a room with respect to the outside or another adjoining room. They incorporate holes in the frame for fixing to the wall or duct by means of screws or rivets.

CONSTRUCTIVE FEATURES:

- Galvanized steel frame for embedding, L-shaped.

- Aluminum slats.

- Ø12 shafts in galvanized steel.

- Ø12 bronze bushings.

- Suitable for 400°/2h (not certified) and temperatures below zero.

- Suitable for speed 18 m/s and with some turbulence.

Please confirm

frontend.are_you_sure