50 Hz
MANUFACTURING FEATURES
• Thermally insulated flexible duct manufactured with inner tube 3 layers of aluminium and 2 layers of polyester.
• Reinforced internally with spiral steel wire. 25mm mineral wool insulation, exterior coating with aluminium and polyester multilayer pipe that works as an optimal vapor barrier and prevents condensation.
• Classification of fire resistance: M1.
• Maximum working pressure: 3000 Pa.
• Working temperature: -30 to 140ºC.
• Maximum speed: 30m/s.
APPLICATION
• In sections of 10 meters for installations of air conditioning, ventilation and VMC systems
MANUFACTURING FEATURES
• Flexible insulated thermo-acoustic tube made with inner tube 3 layers of aluminium and 2 layers of polyester.
• Reinforced internally with spiral steel wire, 25mm mineral wool insulation, exterior coating with aluminium and polyester multilayer pipe that works as an optimal vapor barrier and prevents condensation.
• Maximum working pressure: 2000 Pa.
• Working temperature: -30 to 140ºC.
• Maximum speed: 30m/s.
APPLICATION
• In sections of 10 meters for installations of air conditioning, ventilation and VMC systems.
Exterior polypropylene anti-insect grille. Diameter 125.
Air distribution plenum with six outlets, designed to divide the airflow from the main ventilation duct among several branch ducts. It provides a central connection point and facilitates an organised and compact distribution of the ductwork throughout the installation.
Semi-flexible circular duct made of high-density polyethylene (HDPE), with a double-wall construction and smooth inner surface. Its semi-flexible design facilitates routing through the building, while the smooth internal surface promotes unrestricted airflow. The duct is externally self-extinguishing and internally antistatic.
Circular connector designed to join sections of semi-flexible HDPE duct. It facilitates the continuity and extension of the duct network, providing a secure connection between sections when used with the corresponding sealing and retaining accessories.
Sealing ring for use between the semi-flexible HDPE duct and its connector. It helps provide an airtight connection between components, reducing potential air leakage and contributing to the correct performance of the duct network.
Anti-extrusion ring designed to secure the connection between the HDPE duct and its connector. It helps retain the sealing ring in the correct position during assembly and prevents its displacement, contributing to a secure and airtight joint.
Terminal plenum box with direct coupling for a rectangular air grille. It connects the branch duct to the air terminal and provides a stable interface between the duct network and the grille, facilitating installation and air distribution within the room.
Air diffusion grille
Air diffusion grille (for 2 plenums)
Reducing flexible circular duct clamp from 150 to 125mm
Electrical coil.
Electrical coil.
Filtration for air treatment units equipped with a pre-filter upstream, and air-conditioning units.
• High filtration area, high efficiency, compact and economic filter.
• Media: Mini pleat fiberglass paper
• Frame: Galvanized steel
• Maximum T° in continuous service: 100°C
• Humidity: 100% RH
• Tested for food contact according to CE 1935/2004
• Certified for microbial development (ISO 846-VD 6022)
Filter cells for rough primary filtration for air treatment units or air intake grids.
• Thick synthetic media with high retention capacity pleated between 2 rigid screens.
• Large filter surface.
• Frame: galvanised,
• Maximum continuous operating temperature: 70°C
• Relative humidity: 100%
• Tested for food contact according to EC 1935/2004
+34 972 720 150