50 Hz
Drawers with 1, 2 or 3 stages of in-line filtration for rectangular ducts.
MANUFACTURING FEATURES
• 1mm thick galvanized steel box.
• Suitable for medium and high efficiency filters from IISO Coarse≥60% (G4) up to ePM1≥80%(F9).
• The CPCR is available in 2 sizes (S and M) that allow to combine up to 3 different filtration stages, varying only the length of the boxes.
• The height of boxes is always the same. With two in-line S boxes it would be possible to make a CPCR L for 3 stages of filtration with bag filters.
• The CPCR allows duct mounting for all types of filters (compact, dihedral, bags).
UNDER REQUEST
• Stainless steel or painted steel.
• Outdoor mounting: with outdoor flange and cowl.
• Flat or conical connections to adapt the CPCR to a circular duct.
• Assembly of drawers in battery (horizontal or vertical).
• Active Carbon Filters (CA).
• ATEX version: only for the 1 and 2 stage filtration versions. With grounding and equipotential bonding of all the elements of the drawer (The filters are ATEX specific with antistatic polyester frames).
Drawers with 1, 2 or 3 stages of in-line filtration for rectangular ducts.
MANUFACTURING FEATURES
• 1mm thick galvanized steel box.
• Suitable for medium and high efficiency filters from IISO Coarse≥60% (G4) up to ePM1≥80%(F9).
• The CPCR is available in 2 sizes (S and M) that allow to combine up to 3 different filtration stages, varying only the length of the boxes.
• The height of boxes is always the same. With two in-line S boxes it would be possible to make a CPCR L for 3 stages of filtration with bag filters.
• The CPCR allows duct mounting for all types of filters (compact, dihedral, bags).
UNDER REQUEST
• Stainless steel or painted steel.
• Outdoor mounting: with outdoor flange and cowl.
• Flat or conical connections to adapt the CPCR to a circular duct.
• Assembly of drawers in battery (horizontal or vertical).
• Active Carbon Filters (CA).
• ATEX version: only for the 1 and 2 stage filtration versions. With grounding and equipotential bonding of all the elements of the drawer (The filters are ATEX specific with antistatic polyester frames).
Filter cells for rough primary filtration for air treatment units or air intake grids.
• Thick synthetic media with high retention capacity pleated between 2 rigid screens.
• Large filter surface.
• Frame: galvanised,
• Maximum continuous operating temperature: 70°C
• Relative humidity: 100%
• Tested for food contact according to EC 1935/2004
Filtration for air treatment units equipped with a pre-filter upstream, and air-conditioning units.
• High filtration area, high efficiency, compact and economic filter.
• Media: Mini pleat fiberglass paper
• Frame: Galvanized steel
• Maximum T° in continuous service: 100°C
• Humidity: 100% RH
• Tested for food contact according to CE 1935/2004
• Certified for microbial development (ISO 846-VD 6022)
MANUFACTURING FEATURES
• The INT PS series are highly sensitive, adjustable differential pressure switches suitable for monitoring overpressure, vacuum and differential pressure of air or other non-combustible, non-aggressive gases. The switching pressure setpoint can be adjusted by means of a scaled calibrated knob; the switching ΔP - by a screwdriver and a pressure gauge.
• High sensitivity and accuracy
• Product versions for a variety of pressure ranges
• Adjustable switching point (ΔP)
• Long-term mechanical life
Protection standard IP54 (according EN 60529)
Ambient conditions Temperature -20—85 °C, Rel. humidity < 95 % rh (non-condensing)
Filtration for air treatment units equipped with a pre-filter upstream in white-rooms.
Low pressure drop, high efficiency, compact and economic filter.
• Media: Mini pleat fiberglass paper
• Frame: Polystyrene
• Separator: hot-melt beads
• Sealant: Polyurethane
• Maximum T° in continuous service: 70°C
• Humidity: 100% RH
• Tested for food contact according to CE 1935/2004
• Certified for microbial development (ISO 846-VD 6022)
• Terminal filtration in air treatment units for clean or white room applications and extraction boxes for dangerous and toxic contaminants (asbestos).
• Large air flow with very low initial pressure drop. Solid execution and great finish.
• Mini-folded fibreglass paper stocking.
• Galvanized steel frame.
• Sealant: polyurethane.
• Separator: continuous thermoplastic cords.
• Gasket: Half round monoblock polyurethane.
• Maximum temperature in continuous service 80ºC.
• Relative humidity 70-80%.
• Approved for contact with food according to CE 1935/2004.
• Certified against microbial growth (ISO 846-VD 6022).
• Terminal filtration in air treatment units for clean or white room applications and extraction boxes for dangerous and toxic contaminants (asbestos).
• Large air flow with very low initial pressure drop. Solid execution and great finish.
• Mini-folded fibreglass paper stocking.
• Galvanized steel frame.
• Sealant: polyurethane.
• Separator: continuous thermoplastic cords.
• Gasket: Half round monoblock polyurethane.
• Maximum temperature in continuous service 80ºC.
• Relative humidity 70-80%.
• Approved for contact with food according to CE 1935/2004.
• Certified against microbial growth (ISO 846-VD 6022).
+34 972 720 150