BOX BD PLUS 9/7 EEC+CPCR S 1+ePM1≥50% BS+ HCPCR 1+H13+SMART SYSTEM (EXTRACTION)

Drawers with 1, 2 or 3 stages of in-line filtration for rectangular ducts.

MANUFACTURING FEATURES

• 1mm thick galvanized steel box.
• Suitable for medium and high efficiency filters from IISO Coarse≥60% (G4) up to ePM1≥80%(F9).
• The CPCR is available in 2 sizes (S and M) that allow to combine up to 3 different filtration stages, varying only the length of the boxes.
• The height of boxes is always the same. With two in-line S boxes it would be possible to make a CPCR L for 3 stages of filtration with bag filters.
• The CPCR allows duct mounting for all types of filters (compact, dihedral, bags).

UNDER REQUEST

• Stainless steel or painted steel.
• Outdoor mounting: with outdoor flange and cowl.
• Flat or conical connections to adapt the CPCR to a circular duct.
• Assembly of drawers in battery (horizontal or vertical).
• Active Carbon Filters (CA).
• ATEX version: only for the 1 and 2 stage filtration versions. With grounding and equipotential bonding of all the elements of the drawer (The filters are ATEX specific with antistatic polyester frames).

MANUFACTURING FEATURES
• The INT PS series are highly sensitive, adjustable differential pressure switches suitable for monitoring overpressure, vacuum and differential pressure of air or other non-combustible, non-aggressive gases. The switching pressure setpoint can be adjusted by means of a scaled calibrated knob; the switching ΔP - by a screwdriver and a pressure gauge.

• High sensitivity and accuracy
• Product versions for a variety of pressure ranges
• Adjustable switching point (ΔP)
• Long-term mechanical life

Protection standard IP54 (according EN 60529)
Ambient conditions Temperature -20—85 °C,  Rel. humidity < 95 % rh (non-condensing)

• Filtration for air handling units with low pressure drop and low energy consumption.
• High-tech aerodynamic profile that reduces turbulence in the exhaust air.
• Sewn conical bag.
• Synthetic stocking.
• Galvanized steel frame.
• Maximum temperature in continuous service 70ºC.
• Relative humidity 100%.
• Classification of means against fire M1.
• Approved for contact with food according to CE 1935/2004.
• Certified against microbial growth (ISO 846-VD 6022).

• Terminal filtration in air treatment units for clean or white room applications and extraction boxes for dangerous and toxic contaminants (asbestos).
• Large air flow with very low initial pressure drop. Solid execution and great finish.
• Mini-folded fibreglass paper stocking.
• Galvanized steel frame.
• Sealant: polyurethane.
• Separator: continuous thermoplastic cords.
• Gasket: Half round monoblock polyurethane.
• Maximum temperature in continuous service 80ºC.
• Relative humidity 70-80%.
• Approved for contact with food according to CE 1935/2004.
• Certified against microbial growth (ISO 846-VD 6022).

MANUFACTURING FEATURES
• Robust and compact filter-holder box.
• Adjustment HEPA and high efficiency filters quick and easy.
• BAG-IN BAG-OUT system.

RANGE
• Filter-holder box dimensions for folded and compact filters: (610 x 610 and 292 depth).
• Types of filters that can be used:
-High efficiency filters ePM1≥50% F7 and ePM1≥80% F9 folding (PL) and compact(CM).
-Filters HEPA H13 and H14 folding (PL) and compact (CM).
-Filters active carbon compact (CM).

APPLICATIONS
• Assembly designed for BAG-IN BAG-OUT changes of high security filters.
• Indoor air quality: Filtration of dust (ePM1≥80%, ePM1≥80%) / active carbon / HEPA.
• Air extracted in a microbiological safety laboratory (P3 or P4 confinement). Clean rooms and pre-filtration.
• Health sector.
• Tertiary sector.
• Industrial sector.
• CURAT SYSTEM.

CONSTRUCTION / COMPOSITION
• Housing and connection plane made of 2 mm thick sheet steel, waterproofed with white RAL 9010 epoxy paint.
• Clamping system using a stainless steel frame that presses the entire filter frame. Frame supported by two pivoting levers.
• Installation of the plastic containment bag by means of an elastic ring in the double throat flange (supplied with the product).
• Closing door in white painted sheet steel with 2 handles. It is equipped with a safety device that does not allow the housing to be closed only on condition that the filter is correctly positioned.
• Connection of the box to the network by means of a pre-drilled rectangular flange.
• Pressure taps without connection upstream and downstream of the filter.

OPTIONS UNDER REQUEST
• AISI 314 stainless steel or painted steel under request.
• 3 Dimensions of filter-holder box for folded and compact filters: (305 x 305), (457 x 457), (305 x 610) 48mm, 150mm and 292mm deep.

PUSH BUTTONS
The regulator has 4 buttons: ON / OFF, MODE, UP and DOWN.
Note: If the backlight is off, the first press turns on the backlight. With the backlight on, the push button functions are as described below.

Basic functions:
• ON OFF:
Short / long press: Select the on / off state of the regulator.
• MODE:
Short press: Selects the auto / manual regulation mode.
Long press: Access parameter mode.
Parameter configuration: With MODE the parameter to be displayed is selected, and with UP and DOWN its value is modified. With ON / OFF the parameter settings are sold, returning to the normal operating mode. See annex for configurable parameters of the REG FILTER regulator.
• UP:
Short / long press: Automatic mode: Increases the pressure setpoint (0Pa-10000Pa).
Manual mode: Increase the speed setpoint (0% -100%).
• DOWN:
Short / long press: Auto mode: Decreases the pressure setpoint (10000Pa-0Pa).
Manual mode: Decreases the speed setpoint (100% -0%).
Note: If MODE + UP is pressed continuously when powering the regulator, or after a reset, it returns to the values by defect (showing dEFEC on the screen).