KRISONA EVO 40 EEC WIFI

Rigid PVC duct, Ø160 mm and 700 mm long, designed for wall-mounted ventilation installations. It provides a stable passage through the wall and facilitates the connection of the ventilation unit to the exterior terminal.

External windbreak panel manufactured from stainless steel sheet. Designed to protect the outdoor air intake and exhaust openings from direct wind exposure, helping to reduce the effect of wind on the ventilation system while providing a durable external finish.

External rubber grille that can be installed from the inside wthi out the need for scaffolding.
 

90° adapter for routing the air intake and exhaust through a window jamb. It provides the transition between the circular ventilation duct and the rectangular external opening, allowing the ductwork to change direction within the available installation space.

Rectangular stainless steel grill for ACC window adapter kit 

Rectangular external grille for KRISONA EEC installation kits. Manufactured from stainless steel with a white RAL 9003 polyester powder-coated finish, it completes the external air opening while providing corrosion protection and discreet integration into the façade.

Sensor to control the air temperature in the room: allows automatic start or speed change of the combined product when the temperature exceeds the preset value, selectable by external trimmer and adjustable in the range 10°C - 40°C. A timer allows the appliance to operate for a predetermined time, which can be set during installation from 3 to 20 minutes, after the temperature has dropped below the predetermined threshold.
Single-phase 220-240V / 50- 60 Hz power supply. Wall installation.
The color white.
Maximum allowable load: 3A.
Enclosure for wall installation with IP20 protection.

Sensor for controlling the rate of relative humidity (RH) in the air: allows automatic start or speed switching of the combined product when the percentage of RH exceeds 65%. If the humidity does not exceed the threshold, the associated appliance turns on automatically a few seconds after the light is turned on and continues to operate, after it is turned off, for a preset time, which can be set during installation from 3 to 20 minutes .
Single-phase power supply 220-240 V / 50-60 Hz. Wall installation. The color white.
Maximum admissible load: 3 A.
Enclosure for wall installation with IP20 protection.
Sensor para el control de la tasa de humedad relativa

The kit includes:

• G3 filter (internal side)

• Pre-filter (external side)

• Metal mesh (external side)