Use of Cookies

We use our own cookies and third-party analytical cookies to analyze your browsing habits and offer you content based on your interests. Please refer to our Cookie Policy for more information. By clicking 'Accept,' you acknowledge that you have been informed and consent to the installation and use of cookies. You can also configure or reject their use by clicking HERE.
Cookies policy
Product out of catalogue

BOX HB 71 T4/T8 3/0,55kW (A2:9)

Model
JE 45
Code
A-300719201
Information
ANTI-VIBRATION JOINT

MANUFACTURING FEATURES

• Flexible joint to clinch the fan to the duct.
• Avoids transmission of vibrations for circular and rectangular connection.
• Dimensions: two metallic flanges of 45mm each one and a flexible flange of 60mm.
• The reel is 30,5m lenght.
• Maximum pressure: 20 mmca.
• Fire resistance M0 from -50ºC to +200ºC in continuous and 400ºC/2h.

Model
INT 25 6P A
Code
INT256PA
Information
SAFETY SWITCH

MANUFACTURING FEATURES

• Safety start-stop switches according to IEC 60947-1 and IEC 60947-3.
• IP65 and always equipped an auxiliary contact.
• Useful for switching off the current before handling the fan.

*Máx. thermal current air (A)

Model
VISERA BOX HB 71-80
Code
VISB0810150
Information
OUTDOOR FLANGE WITH BIRD GUARD FOR BOX HB

MANUFACTURING FEATURES

• Outdoor flange with bird guard for BOX HB.
• Made of galvanized Steel.

Model
B CMP 800x800 (for CMP-HUT)
Code
BCMP58080
Information
FRAME FOR CMP-HUT

Union FRAME between CMP-HUT and BOX HB, or and roof fans. The frame ensures a perfect coupling between the fan and the CMP-HUT damper. The frame ensures the minimum distance recommended by Casals between the damper and the fan to reduce the impact of pressure loss, as well as turbulent air impacting against the slats, thus increasing the reliability of the product over the years, reducing noise and vibrations in the duct system, and ensuring the performances studied according to laboratory tests.

| MANUFACTURING FEATURES
• Galvanized steel frame, U-shaped to install in a duct.
• Suitable for 400°/2h (not certified) and temperatures below zero.
• Suitable for speed 18 m/s and with some turbulence.

Model
CMP-HUT 800x800
Code
CMPHUT58080
Information
DEPRESSION DAMPER (HORIZONTAL or VERTICAL PLACEMENT)

Depression damper for ascending air flow in the intake. The slats block the passage of air when the fan is stopped while when the fan is running the slats move by depression allowing the passage of air. Robust U-shaped frame. The special holes in the corners allow a connection with common union systems on the market such as a duct working in plenum mode. It maintains the overpressure or depression inside a room with respect to the outside or another adjoining room.

MANUFACTURING FEATURES:

- Galvanized steel frame, U-shaped to install in a duct.

- Aluminum slats.

- Ø12 shafts in galvanized steel.

- Ø12 bronze bushings.

- Suitable for 400°/2h (not certified) and temperatures below zero.

- It can be installed directly to the fan, although the use of the frame (B CMP) is recommended.

- Suitable for speed 18 m/s and with some turbulence.

Please confirm

frontend.are_you_sure